Does it can be adjustment for render width
We have different models with width of 80cm,100cm,120cm, but for one machine,the render width can not be adjusted.
If the wall height is more than 5 meters, what should do
Generally speaking, This machine’s standard is for less than 5meters, if more than 5meters, please tell us in advance, we need to special manufacture it for you.
If I want to rendering 3m, 4م, 5m wall, does one set machine be OK
Yes,we will send you 20cm,40cm,60cm,80cm ,2m uprights of different length to you after you bought, So you can choose upright according to the height of the wall.
What’s the rendering thickness of the machine? Can I adjust and control the thickness?
-Rendering thickness from 2mm-30mm, it can be adjust. -We use newest Infrared laser leveling way to instead of Making point by manual,just adjust the position of the Infrared laser, making rendering machine far from the wall 2mm to 30mm.
3. What is the ratio of the raw material? Do I have to use ready mix cement, sand and water for this machine? Do you have wet mortar mix machine
Cement: sand=1:2 Yes, this automatic rendering machine can’t mix the cement, sand and water, which should be mixed by manual or other mortar mixer machine If you need to mix cement+sand+water by machine, we have wet mortar mixing machine to recommend
What’s the difference of ORM5, ORM6 and ORM7
There are no essential differences, just on request of different customer's different demand: 1. ORM5 can render from 20cm to 4.5m, rendering width can be 800mm; 1000mmand 1200mm 2.ORM6 can render from 0cm to 4.5m, rendering width can be 1000mm; 3.ORM7 is updating type of ORM5, has same technical parameters of ORM5
Whether can use the hose pump to grouting? How to configure it if can?
Yes, but need to know the pressure displacement and medium; The pressure of the pump can realize; if to spray need to add an air compressor.
What is the high temperature that the squeeze tube can withstand?
Natural rubber maximum temperature of 70 degrees; Nitrile rubber, epdm maximum temperature under 100 degrees.
What is the wear parts of the hose pump
Squeeze tube
What is the manufacturing days of the hose pump
Normal 25 working day.