About the raw material of the front blade, We cooperate with phoenix hardened aluminum, it went through high hardness aluminum oxidation, to ensure the wipe board smooth without any distortion.in the working process, so can ensure the flatness of the wall
First let the machine stop on the top of the window, then add cement mortar, let the machine work above the window. Then let the machine work under the window.
No need special materials, The mortar is the same as the mortar which by manual plastering wall
No.Full Automatic .we use rendering panel which can change the angle.
الأعلى. gaps is only 1-2mm, workers can plaster it smoothly by manual
We have different models with width of 80cm,100cm,120cm, but for one machine,the render width can not be adjusted.
Generally speaking, This machine’s standard is for less than 5meters, if more than 5meters, please tell us in advance, we need to special manufacture it for you.
Yes,we will send you 20cm,40cm,60cm,80cm ,2m uprights of different length to you after you bought, So you can choose upright according to the height of the wall.
-Rendering thickness from 2mm-30mm, it can be adjust. -We use newest Infrared laser leveling way to instead of Making point by manual,just adjust the position of the Infrared laser, making rendering machine far from the wall 2mm to 30mm.
Cement: sand=1:2 Yes, this automatic rendering machine can’t mix the cement, sand and water, which should be mixed by manual or other mortar mixer machine If you need to mix cement+sand+water by machine, we have wet mortar mixing machine to recommend