Can we use our own motor for the machine
Only OG5040 that you can use your own motor. Other type mortar pump has their dedicated motors.
What is mortar pump the difference between single cylinder and double cylinder
Single cylinder pressure fluctuation is large, double cylinder pressure fluctuation is small; Fluctuation little conveying distance long.
Do you have user manual of the mortar machine? How to use it? How to clean it
Yes, we have. All can be seen in the user manual, and will send to your email later.
Can the mortar pump be used for spraying
Suggested not too high if spraying construction, uniform spray is not easy; The best for inside layer construction. It is ok that spray height of 10 meters; The pipe length is not recommended more than 40 meters; The reason is not pump pressure not enough, but the longer the pipe, the higher the nozzle discharge uniformity more bad.
How long hose does the mortar pump contain
OG5040 mortar pump One root 20 meters convey hose.
What is the material of the front blade
About the raw material of the front blade, We cooperate with phoenix hardened aluminum, it went through high hardness aluminum oxidation, to ensure the wipe board smooth without any distortion.in the working process, so can ensure the flatness of the wall
How the machine is working when there is a window on the wall
First let the machine stop on the top of the window, then add cement mortar, let the machine work above the window. Then let the machine work under the window.
Does it needs special materials in the cement mixture in order to wipe it on the wall
No need special materials, The mortar is the same as the mortar which by manual plastering wall
Does it need render section joints flatness manually
No.Full Automatic .we use rendering panel which can change the angle.
Is there some gaps between one time rendering from another time rendering
Max. gaps is only 1-2mm, workers can plaster it smoothly by manual