Three Cylinder Rotary Dryer

Three Cylinder Rotary Dryer 2018-02-27T19:15:36+08:00

Project Description

Sand Three Cylinder Rotary Dryer

Sand Rotary Dryer
Sand Rotary Dryer

Sand Rotary Dryer our products

  • Drum Dryer machine;
  • Three Cylinder Dryer;
  • 5TPH Rotary Dryer;
  • 10-15tph Rotary Dryer;
  • 20-40tph Rotary Dryer.

Drying modes:

  • Diesel
  • Gasoline
  • Coal
  • Natural gas,marsh gas

whatsapp

CHAT NOW
GET QUOTE
Model
(mm)
Inclination
(%)
Rotate speed
(r/min)
Air inlet
temperature
(° C)
Power
(kw)
Production
capacity
(t/h)
Weight
(t)
Φ 600×6000 3-5 3-8 ≤ 700 3 0.5-1.5 2.9
Φ 800×8000 3-5 3-8 ≤ 700 4 0.8-2.0 3.5
Φ 800×10000 3-5 3-8 ≤ 700 4 0.8-2.5 4.5
Φ 1000×10000 3-5 3-8 ≤ 700 5.5 1.0-3.5 5.6
Φ 1200×10000 3-5 3-8 ≤ 700 7.5 1.8-5 14.5
Φ 1200×12000 3-5 3-8 ≤ 700 11 2-6 14.8
Φ 1500×12000 3-5 2-6 ≤ 800 15 3.5-9 17.8
Φ 1800×12000 3-5 2-6 ≤ 800 18 5-12 25
Φ 2200×12000 3-5 1.5-6 ≤ 800 18.5 6-15 33
Φ 2200×18000 3-5 1.5-6 ≤ 800 22 10-18 53.8
Φ 2200×20000 3-5 1.5-6 ≤ 800 30 12-20 56
Φ 2400×20000 3-5 1.5-5 ≤ 800 37 18-30 60
Φ 3000×20000 3-5 1.5-5 ≤ 800 55 25-35 78
Φ 3000×25000 3-5 1.5-5 ≤ 800 75 32-40 104.9

Applications Of Rotary Dryer

Rotary Dryer, also known as Rotary Dryer,It is widely used in building materials, metallurgy, chemicals and industrial, Rotary dryer is applicable for particle materials, and is also applicable for paste and viscous materials which are mingled with particle materials, or materials whose water content is high. This rotary dryer can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone,Sand

Sand Dryer For Dry Mortar Mixing Plant

Sand dryer is handling by bringing it into direct contact with a heated gas. The sand dryer consists of revolved body, raise material board, transmission device, support device and seal ring etc ,The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under .

Working Principle Of Sand Dryer

Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.

Inquiry Or Whatsapp +8613027728770

First Name*

Email*

Subject*

Your message*